As most of you know, I not only create bulletin boards for my church but another local church. The Pastor will usually send me a graphic that leads me in the direction of how the board should look. Of course, there is always the understanding that I may not be able to reproduce it exactly and variations may occur.
Here is a picture of one the two graphics he forwarded to be considered for reproduction in bulletin board form.
As soon as I saw this graphic, I knew I wanted to try and reproduce it even though it is out of my creative comfort zone. Of course, I took the pic to review with my friend, Debbie, who always helps me talk through how I can make the possibility given come to completion.
My goal was to make the main element look like a slab of stone with the icons etched in the stone. Now, I've become pretty proficient in cutting items from foam board. However, I also know foam board is not really paintable as it likes to warp during the drying process. It wasn't until I took a trip to Hobby Lobby that I found how to resolve this "problem". There I found large sheets of picture mat board. I purchased two pieces in a sand color.
Then, the icon process began.
First, I sketched the 3 icons from the graphic and an additional icon (not pictured) in the form of a cloud on to sketch paper.
Then using a utility knife, I cut out the "templates" that would be traced onto the mat board pieces.
After measuring and tracing the icons onto the mat board, I used a utility knife to cut out the icons.
I also cut out the word "The Journey" using letters I cut with my Cricut cutter and I traced onto the mat board.
Over the next few days, I applied stone texture spray onto the board. I used 1 1/2 cans for the base. Then, I used a light gray and pebble stone colored acrylic paint to add some shading to the edges. Once the shaded areas were dry, I sprayed the entire mat board with the remaining stone spray to soften the shading a touch. I also, put a black luster card stock behind each icon and the words to give it the look that they were etched into the stone. Finally, using my Cricut cutter I cut out the title words "Exodus God's Story Continues".Last Thursday, I installed the board at the church. It was placed off center and on the right side of the board I attempted to do an accordion fold with the background paper to give it a little texture.
The board will be up until the end of November, so the Pastor is going to apply (via ink pad) some sandal "footprints" in some of open the blue space.
This was a first attempt at "mimicking" a slab of stone. There are several things I would do differently. I would back the mat board with foam board to give it some more dimension. I would also give the sides a rugged cut to give that "look" of a stone that has been quarried.
All in all though I am pleased with the outcome.
As always, thanks for stopping by!








